First off, this was not a new sculpt when it was released. There have been a number of repaints for this figure that i can recall which adds to the complaints of Mattel re-using or recycling the same figures and parts. It was originally released in the 2003 Mattel Batman figure toy line. One variant with goggles, and one without. It was released again with a new paint job in 2006 in the DC Superheroes toy line in series 3 and then finally this exclusive figure came out a year later in 2007.
Freeze's stands 6 inches tall with bulky wide shoulders and big boots. The Tech Suit has plenty of detail including small patches of ice leaking out in various spots. The head is under glass which is NOT removable. The face looks great supporting a cold evil expression.
gauges positioned in various places. There are some spots where the paint goes over the lines, like around the belt and the blue part of the shoulder piece but overall there is nothing really bad. The face is painted nicely and very clean with some highlights in a lighter tone over the forehead, chin and nose. Unfortunately, this is probably the only area on the figure where there is any highlighting which is a shame. The worst part of the paint job in my opinion is the frost they've attempted to put around the glass helmet. It just looks like splattered paint and is really quite sloppy. I could have done without it.
permanently attached by a plastic hose to a very bulky back pack. The back pack just pops right into Freeze's back and fits in securely. The gun is meant to be held by two hands. His right hand at the trigger and his left hand on the handle towards the front of the gun. The gun can be held by just his right hand but it is quite heavy and just weighs his arm down. Despite the clunkiness, the gun and the back pack have plenty of detail although, like the figure, could use some shading and highlighting. He could also perhaps use a smaller gun, one that is just the size of a hand gun and doesnt attach to anything as seen in Batman the Animated series.
removable. But it turns when you turn the lower end of Freeze's body so the head is always facing the direction that the feet are facing. The shoulder joints are constricted a bit by the bulky tech suit design. Out of the package, the joints were a bit loose for my liking. Mostly in the knees which ticked me off a little. Usually i find i don't have this issue from this line of action figures. Regardless it's not bad enough where he can't stand but I would have liked the knees to be tighter.
DCSH and DCUC toys from Mattel. He would not be bad with DC Direct toys either but keep in mind DCD figures are generally a bit taller than Mattel figures.
Sculpt/Design - 8.5, Paint - 7, Accessories - 8, Articulation - 8, Fun - 8
Mr. Freeze Overall - 8/10
Since this is a NY Comic Con exclusive toy, this figure is hard to find. If you do find it, it's expensive at this point. A quick search on eBay came up with 2 auctions for this figure in the $50 range. The other versions can be obtain at a cheaper costs
To find DC Superheroes Mr. Freeze by Mattel on eBay, click here.